Introduction – Getting Started with a Sewer Camera

Good morning! I’m super excited today because a sewer camera company reached out to me. They asked if I’d review their Sanyipace sewer camera, and of course, I said yes.

The first model they mentioned was the S510DSRKM, which is self-leveling, has a meter counter, a 512Hz transmitter, bright LEDs, video recording, and comes with a 32GB memory card. It’s IP68 waterproof, runs on a 4500mAh battery, and even has a wheeled carrier. While that’s useful, I found it a bit bulky for my truck setup.

They also offered me another model: the S8951DM. It comes with a locator, has a slightly smaller 9-inch screen (compared to the S510’s 10-inch), and no wheel carrier—which honestly works better for me.

Before testing, I researched Sanyipace sewer cameras and compared them to the camera I already own. Unlike my old one, which is only meant for occasional use, the Sanyipace is built for regular, professional jobs.

Features of the Sanyipace Sewer Camera

Here’s what stood out to me about this plumbing inspection camera:

• Self-leveling camera head with adjustable LEDs

• Meter counter (switchable between feet and meters)

• 512Hz transmitter for locator use

• Video recording and snapshots with 32GB SD card storage

• 9-inch screen with playback and color/contrast control

• Flexible yet sturdy cable for navigating tighter bends

• Locator system included for pinpointing underground pipe positions

I’ve used stiffer cables before, and while they’re better for long runs, they struggle around bends. The Sanyipace camera’s flexibility makes navigation much easier.

Field Test – Setup and First Impressions

Since I didn’t have a sewer cleaning job immediately available, I tested the camera at my parents’ house (built in 1979). I opened the clean-out in the crawl space and got everything set up.

The setup process was straightforward: attach the camera head, screw on the guide, and power it on. The LEDs have five brightness levels, and the self-leveling feature keeps the image upright without guesswork.

Within minutes, I was running the camera through the pipe. The video feed was clear, and I spotted some spider webs and a low spot (belly) in the pipe where water collected. I recorded footage to show how the drain behaved. Playback worked well, though audio must be added later on a computer.

👉 Older homes often face similar drainage issues, which the EPA highlights in its septic system guide.

Using the Locator with the Sewer Camera

At around 15 feet in, I wanted to test the locator. The instructions were simple and easy to follow. After plugging in the transmitter, I went outside to track the camera head underground.

The locator allowed me to narrow down the exact location of the pipe, about 44 inches below ground, by adjusting the sensitivity settings. It took a bit of fine-tuning, but the system worked as intended.

Final Thoughts

Overall, I really like the Sanyipace drain inspection camera and locator. The self-leveling function, meter counter, and locator make it a reliable tool for professional drainage work. The build quality feels sturdier than my old camera, and I believe it will hold up well over time.

If you’re a contractor or plumber looking for a sewer camera that’s affordable yet capable, this one is definitely worth considering.

That’s a wrap—have a good night!